BẢO DƯỠNG LẦN ĐẦU CHO CB500X 2022 CỦA MÌNH

#firstmainerence #cb500x #honda #MotorCyClemaineDerence #bikemainective ## ** Bảo trì đầu tiên cho CB500X 2022 ** của tôi

CB500X của bạn là một chiếc xe máy đáng tin cậy và dễ bảo trì, nhưng nó vẫn cần bảo trì thường xuyên để giữ cho nó hoạt động trơn tru.Dưới đây là hướng dẫn để bảo trì đầu tiên bạn nên thực hiện trên CB500X 2022 của mình.

** 1.Kiểm tra mức dầu và tình trạng **

Mức dầu nên được kiểm tra mỗi khi bạn đổ đầy khí.Để kiểm tra mức dầu, hãy đỗ xe đạp trên bề mặt cấp và tắt động cơ.Sau đó, xác định vị trí các que thăm dầu dưới động cơ.Kéo ra que nhúng và lau sạch nó bằng một miếng giẻ.Tái lại que thăm và kéo nó ra một lần nữa.Mức dầu nên nằm giữa các dấu hiệu "đầy đủ" và "thêm" trên que thăm.Nếu mức dầu thấp, hãy thêm dầu cho đến khi đạt đến dấu "đầy đủ".

Bạn cũng nên kiểm tra tình trạng của dầu.Dầu phải sạch và màu nâu vàng.Nếu dầu tối hoặc nhiều mây, hoặc nếu nó có bất kỳ hạt nào trong đó, nó cần phải được thay đổi.

** 2.Thay đổi dầu và bộ lọc **

Dầu và bộ lọc nên được thay đổi cứ sau 4.000 dặm hoặc sáu tháng một lần, tùy theo điều kiện nào đến trước.Để thay dầu, bạn sẽ cần:

* Bộ lọc dầu mới
* Dầu mới
* Ống khói
* Cờ lê
* Rags

Đầu tiên, đỗ xe đạp trên bề mặt cấp độ và tắt động cơ.Sau đó, xác định vị trí phích cắm cống dầu dưới động cơ.Đặt một chảo thoát nước dưới phích cắm cống dầu.Sử dụng cờ lê để nới lỏng phích cắm cống dầu và cho phép dầu thoát ra.Một khi tất cả các loại dầu đã thoát ra, thay thế phích cắm cống dầu.

Tiếp theo, xác định vị trí bộ lọc dầu ở bên cạnh động cơ.Sử dụng cờ lê để nới lỏng bộ lọc dầu và loại bỏ nó.Áp dụng một lớp dầu mỏng mới vào miếng đệm của bộ lọc dầu mới.Sau đó, vặn bộ lọc dầu mới lên động cơ cho đến khi nó được khít.

Cuối cùng, thêm dầu mới vào động cơ.Khả năng dầu cho CB500X là 3,7 quarts.Thêm dầu cho đến khi mức dầu nằm giữa các dấu "đầy đủ" và "thêm" trên que thăm.

** 3.Kiểm tra bộ lọc không khí **

Bộ lọc không khí nên được kiểm tra cứ sau 4.000 dặm hoặc sáu tháng một lần, tùy theo mức nào đến trước.Để kiểm tra bộ lọc không khí, tháo nắp bộ lọc không khí.Bộ lọc không khí được đặt bên trong nắp bộ lọc không khí.Hủy bỏ bộ lọc không khí và kiểm tra nó cho bụi bẩn, mảnh vụn hoặc thiệt hại.Nếu bộ lọc không khí bị bẩn, nó nên được thay thế.

**4.Kiểm tra bugi **

Các bugi nên được kiểm tra cứ sau 12.000 dặm hoặc mỗi năm, tùy theo điều kiện nào đến trước.Để kiểm tra các bugi, hãy loại bỏ các nắp bugi.Các bugi được đặt ở đầu động cơ.Hủy bỏ các bugi và kiểm tra chúng về hao mòn, hư hỏng hoặc ăn mòn.Nếu bugi bị mòn hoặc bị hỏng, chúng nên được thay thế.

** 5.Kiểm tra phanh **

Phanh nên được kiểm tra cứ sau 4.000 dặm hoặc sáu tháng một lần, tùy theo điều kiện nào đến trước.Để kiểm tra phanh, hãy kiểm tra các miếng phanh để mòn.Các miếng phanh nên có ít nhất 1/8 inch vật liệu còn lại trên chúng.Nếu các miếng phanh được mòn xuống 1/8 inch, chúng nên được thay thế.

Bạn cũng nên kiểm tra mức chất lỏng phanh.Hồ chứa chất lỏng phanh nằm ở mặt trước của xe đạp.Mức chất lỏng phanh phải nằm giữa các dấu "tối thiểu" và "tối đa" trên hồ chứa.Nếu mức chất lỏng phanh thấp, hãy thêm chất lỏng phanh cho đến khi đạt điểm "tối đa".

** 6.Kiểm tra lốp xe **

Các lốp xe nên được kiểm tra cứ sau 4.000 dặm hoặc sáu tháng một lần, tùy theo điều kiện nào đến trước.Để kiểm tra lốp xe, kiểm tra áp suất lốp và độ sâu của lốp.Áp suất lốp nên được kiểm tra bằng đồng hồ đo áp suất lốp.Áp suất lốp được khuyến nghị cho CB500X là 32 psi trong
=======================================
#firstmaintenance #cb500x #honda #motorcyclemaintenance #bikemaintenance ## **First Maintenance for My CB500X 2022**

Your CB500X is a reliable and easy-to-maintain motorcycle, but it still needs regular maintenance to keep it running smoothly. Here is a guide to the first maintenance you should do on your CB500X 2022.

**1. Check the oil level and condition**

The oil level should be checked every time you fill up with gas. To check the oil level, park your bike on a level surface and turn off the engine. Then, locate the oil dipstick under the engine. Pull out the dipstick and wipe it clean with a rag. Reinsert the dipstick and pull it out again. The oil level should be between the "full" and "add" marks on the dipstick. If the oil level is low, add oil until it reaches the "full" mark.

You should also check the condition of the oil. The oil should be clean and golden brown in color. If the oil is dark or cloudy, or if it has any particles in it, it needs to be changed.

**2. Change the oil and filter**

The oil and filter should be changed every 4,000 miles or every six months, whichever comes first. To change the oil, you will need:

* New oil filter
* New oil
* Funnel
* Wrench
* Rags

First, park your bike on a level surface and turn off the engine. Then, locate the oil drain plug under the engine. Place a drain pan under the oil drain plug. Use the wrench to loosen the oil drain plug and allow the oil to drain out. Once all of the oil has drained out, replace the oil drain plug.

Next, locate the oil filter on the side of the engine. Use the wrench to loosen the oil filter and remove it. Apply a thin coat of new oil to the gasket of the new oil filter. Then, screw the new oil filter onto the engine until it is snug.

Finally, add new oil to the engine. The oil capacity for the CB500X is 3.7 quarts. Add oil until the oil level is between the "full" and "add" marks on the dipstick.

**3. Inspect the air filter**

The air filter should be inspected every 4,000 miles or every six months, whichever comes first. To inspect the air filter, remove the air filter cover. The air filter is located inside the air filter cover. Remove the air filter and inspect it for dirt, debris, or damage. If the air filter is dirty, it should be replaced.

**4. Inspect the spark plugs**

The spark plugs should be inspected every 12,000 miles or every year, whichever comes first. To inspect the spark plugs, remove the spark plug caps. The spark plugs are located in the head of the engine. Remove the spark plugs and inspect them for wear, damage, or corrosion. If the spark plugs are worn or damaged, they should be replaced.

**5. Inspect the brakes**

The brakes should be inspected every 4,000 miles or every six months, whichever comes first. To inspect the brakes, check the brake pads for wear. The brake pads should have at least 1/8 inch of material left on them. If the brake pads are worn down to 1/8 inch, they should be replaced.

You should also check the brake fluid level. The brake fluid reservoir is located on the front of the bike. The brake fluid level should be between the "min" and "max" marks on the reservoir. If the brake fluid level is low, add brake fluid until it reaches the "max" mark.

**6. Inspect the tires**

The tires should be inspected every 4,000 miles or every six months, whichever comes first. To inspect the tires, check the tire pressure and tread depth. The tire pressure should be checked with a tire pressure gauge. The recommended tire pressure for the CB500X is 32 psi in
 
Join ToolsKiemTrieuDoGroup
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock