Gologin
Active member
**Gologin IP for Linux Tutorial**
Gologin IP is a proxy tool that allows you to create and manage multiple Gmail, Facebook, Tiktok, and other accounts without worrying about being locked. It is a powerful tool that can be used for a variety of purposes, including social media marketing, account farming, and SEO.
This tutorial will show you how to install and use Gologin IP on a Linux server.
**Prerequisites**
To follow this tutorial, you will need the following:
* A Linux server with at least 2GB of RAM and 20GB of storage
* A domain name and a hosting account
* The Gologin IP software
**Installation**
1. Download the Gologin IP software from the official website.
2. Unzip the file and copy the contents to the /opt directory on your server.
3. Create a new file called gologin.sh in the /etc/init.d directory.
4. Open the file in a text editor and paste the following code:
```
#!/Bin/sh
### BEGIN INIT INFO
# Provides: gologin
# Required-Start: $network $remote_fs $syslog
# Required-Stop: $network $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start/stop gologin
# Description: Start/stop gologin
### END INIT INFO
# Set the GOLOGIN_HOME environment variable
export GOLOGIN_HOME=/opt/gologin
# Check if the gologin service is already running
if [ -f $GOLOGIN_HOME/run.pid ]; then
echo "Gologin is already running."
exit 0
fi
# Start the gologin service
nohup $GOLOGIN_HOME/gologin &
# Check if the gologin service is running
while ! [ -f $GOLOGIN_HOME/run.pid ]; do
sleep 1
done
# Print a success message
echo "Gologin has been started."
```
5. Save the file and close the editor.
6. Make the gologin.sh file executable by running the following command:
```
chmod +x /etc/init.d/gologin
```
7. Start the gologin service by running the following command:
```
sudo service gologin start
```
8. Verify that the gologin service is running by running the following command:
```
sudo service gologin status
```
You should see output similar to the following:
```
● gologin - Start/stop gologin
Loaded: loaded (/etc/init.d/gologin; bad; vendor preset: enabled)
Active: active (running) since Thu 2023-03-03 02:23:21 UTC; 1min 19s ago
Process: 10288 ExecStart=/opt/gologin/gologin (code=exited, status=0/SUCCESS)
Main PID: 10288 (gologin)
CGroup: /system.slice/gologin.service
└─10288 /opt/gologin/gologin
```
**Usage**
Once the gologin service is running, you can use it to create and manage multiple Gmail, Facebook, Tiktok, and other accounts.
To create a new account, simply run the following command:
```
gologin create <account_type> <username> <password>
```
For example, to create a new Gmail account, you would run the following command:
```
gologin create gmail johndoe@gmail.com password123
```
You can then use the following commands to manage your accounts:
* list - List all of your accounts
* get - Get the details of a specific account
* delete
Gologin IP is a proxy tool that allows you to create and manage multiple Gmail, Facebook, Tiktok, and other accounts without worrying about being locked. It is a powerful tool that can be used for a variety of purposes, including social media marketing, account farming, and SEO.
This tutorial will show you how to install and use Gologin IP on a Linux server.
**Prerequisites**
To follow this tutorial, you will need the following:
* A Linux server with at least 2GB of RAM and 20GB of storage
* A domain name and a hosting account
* The Gologin IP software
**Installation**
1. Download the Gologin IP software from the official website.
2. Unzip the file and copy the contents to the /opt directory on your server.
3. Create a new file called gologin.sh in the /etc/init.d directory.
4. Open the file in a text editor and paste the following code:
```
#!/Bin/sh
### BEGIN INIT INFO
# Provides: gologin
# Required-Start: $network $remote_fs $syslog
# Required-Stop: $network $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start/stop gologin
# Description: Start/stop gologin
### END INIT INFO
# Set the GOLOGIN_HOME environment variable
export GOLOGIN_HOME=/opt/gologin
# Check if the gologin service is already running
if [ -f $GOLOGIN_HOME/run.pid ]; then
echo "Gologin is already running."
exit 0
fi
# Start the gologin service
nohup $GOLOGIN_HOME/gologin &
# Check if the gologin service is running
while ! [ -f $GOLOGIN_HOME/run.pid ]; do
sleep 1
done
# Print a success message
echo "Gologin has been started."
```
5. Save the file and close the editor.
6. Make the gologin.sh file executable by running the following command:
```
chmod +x /etc/init.d/gologin
```
7. Start the gologin service by running the following command:
```
sudo service gologin start
```
8. Verify that the gologin service is running by running the following command:
```
sudo service gologin status
```
You should see output similar to the following:
```
● gologin - Start/stop gologin
Loaded: loaded (/etc/init.d/gologin; bad; vendor preset: enabled)
Active: active (running) since Thu 2023-03-03 02:23:21 UTC; 1min 19s ago
Process: 10288 ExecStart=/opt/gologin/gologin (code=exited, status=0/SUCCESS)
Main PID: 10288 (gologin)
CGroup: /system.slice/gologin.service
└─10288 /opt/gologin/gologin
```
**Usage**
Once the gologin service is running, you can use it to create and manage multiple Gmail, Facebook, Tiktok, and other accounts.
To create a new account, simply run the following command:
```
gologin create <account_type> <username> <password>
```
For example, to create a new Gmail account, you would run the following command:
```
gologin create gmail johndoe@gmail.com password123
```
You can then use the following commands to manage your accounts:
* list - List all of your accounts
* get - Get the details of a specific account
* delete
