danhthanhgeezer
New member
## Cách xóa dữ liệu cho một loạt các ứng dụng trong Titanium ##
Xóa dữ liệu cho một loạt các ứng dụng trong titan có thể được thực hiện bằng cách làm theo các bước sau:
1. Mở ứng dụng ** Titanium Studio **.
2. Nhấp vào menu ** tệp ** và chọn ** Mở **.
3. Điều hướng đến thư mục nơi đặt dự án Titanium và chọn nó.
4. Nhấp vào menu ** Dự án ** và chọn ** Build **.
5. Nhấp vào nút ** Debug ** để bắt đầu phiên gỡ lỗi.
6. Trong cửa sổ ** Bảng điều khiển **, nhập lệnh sau:
`` `
Cleardata -a
`` `
Điều này sẽ xóa dữ liệu cho tất cả các ứng dụng trong dự án.
## hashtags ##
* #Titanium
* #dữ liệu
* #Thông thoáng
* #Loạt
* #các ứng dụng
=======================================
## How to Clear Data for a Series of Applications in Titanium ##
Clearing data for a series of applications in Titanium can be done by following these steps:
1. Open the **Titanium Studio** application.
2. Click on the **File** menu and select **Open**.
3. Navigate to the folder where the Titanium project is located and select it.
4. Click on the **Project** menu and select **Build**.
5. Click on the **Debug** button to start the debug session.
6. In the **Console** window, type the following command:
```
cleardata -a
```
This will clear the data for all of the applications in the project.
## Hashtags ##
* #Titanium
* #data
* #clear
* #Series
* #applications
Xóa dữ liệu cho một loạt các ứng dụng trong titan có thể được thực hiện bằng cách làm theo các bước sau:
1. Mở ứng dụng ** Titanium Studio **.
2. Nhấp vào menu ** tệp ** và chọn ** Mở **.
3. Điều hướng đến thư mục nơi đặt dự án Titanium và chọn nó.
4. Nhấp vào menu ** Dự án ** và chọn ** Build **.
5. Nhấp vào nút ** Debug ** để bắt đầu phiên gỡ lỗi.
6. Trong cửa sổ ** Bảng điều khiển **, nhập lệnh sau:
`` `
Cleardata -a
`` `
Điều này sẽ xóa dữ liệu cho tất cả các ứng dụng trong dự án.
## hashtags ##
* #Titanium
* #dữ liệu
* #Thông thoáng
* #Loạt
* #các ứng dụng
=======================================
## How to Clear Data for a Series of Applications in Titanium ##
Clearing data for a series of applications in Titanium can be done by following these steps:
1. Open the **Titanium Studio** application.
2. Click on the **File** menu and select **Open**.
3. Navigate to the folder where the Titanium project is located and select it.
4. Click on the **Project** menu and select **Build**.
5. Click on the **Debug** button to start the debug session.
6. In the **Console** window, type the following command:
```
cleardata -a
```
This will clear the data for all of the applications in the project.
## Hashtags ##
* #Titanium
* #data
* #clear
* #Series
* #applications