blueostrich294
New member
## Cách đọc một dòng tệp từng dòng trong Python
Trong hướng dẫn này, bạn sẽ tìm hiểu cách đọc một dòng từng dòng trong Python.Chúng tôi sẽ đề cập đến các chủ đề sau:
* Mở một tệp trong Python
* Đọc một dòng tệp từng dòng
* Xử lý lỗi khi đọc tệp
* Đóng một tệp
### Mở một tệp trong Python
Để mở một tệp trong Python, bạn có thể sử dụng hàm `open ()`.Hàm `open ()` có hai đối số: tên tệp và chế độ.Chế độ có thể là "R" để đọc, "W" để viết hoặc "A" để nối thêm.
Ví dụ: mã sau mở tệp `" myfile.txt "` ở chế độ đọc:
`` `Python
file = open ("myfile.txt", "r")
`` `
### Đọc một dòng tệp từng dòng
Khi bạn đã mở một tệp, bạn có thể đọc nó từng dòng bằng phương thức `readline ()`.Phương thức `readline ()` trả về một dòng từ tệp.
Ví dụ: mã sau đọc dòng đầu tiên từ tệp `" myfile.txt "`:
`` `Python
line = file.Readline ()
`` `
Bạn có thể tiếp tục gọi phương thức `readline ()` cho đến khi nó trả về `none`, điều này chỉ ra rằng kết thúc của tệp đã đạt được.
### Lỗi xử lý khi đọc tệp
Có một vài lỗi có thể xảy ra khi đọc một tệp.Ví dụ: nếu tệp không tồn tại, hàm `open ()` sẽ tăng ngoại lệ `filenotfounderror`.
Bạn có thể nắm bắt các ngoại lệ bằng cách sử dụng các câu lệnh `thử` và` ngoại trừ.Ví dụ: mã sau cố gắng mở tệp `" myfile.txt "` và in thông báo lỗi nếu tệp không tồn tại:
`` `Python
thử:
file = open ("myfile.txt", "r")
Ngoại trừ FilenotFounderror:
in ("Tệp không tồn tại.")
`` `
### đóng một tệp
Khi bạn đọc xong một tệp, bạn nên đóng nó bằng phương thức `Close ()`.Phương thức `đóng ()` phát hành các tài nguyên được liên kết với tệp.
Ví dụ: mã sau đóng tệp `" myfile.txt "`:
`` `Python
file.close ()
`` `
### Bản tóm tắt
Trong hướng dẫn này, bạn đã học cách đọc một dòng tệp từng dòng trong Python.Bạn đã học cách mở một tệp, đọc từng dòng tệp, xử lý các lỗi khi đọc tệp và đóng một tệp.
## hashtags
* #Python
* #Tài liệu
* #đọc
* #Đường kẻ
* #Programming
=======================================
## How to Read a File Line by Line in Python
In this tutorial, you will learn how to read a file line by line in Python. We will cover the following topics:
* Opening a file in Python
* Reading a file line by line
* Handling errors when reading a file
* Closing a file
### Opening a File in Python
To open a file in Python, you can use the `open()` function. The `open()` function takes two arguments: the filename and the mode. The mode can be either "r" for read, "w" for write, or "a" for append.
For example, the following code opens the file `"myfile.txt"` in read mode:
```python
file = open("myfile.txt", "r")
```
### Reading a File Line by Line
Once you have opened a file, you can read it line by line using the `readline()` method. The `readline()` method returns a single line from the file.
For example, the following code reads the first line from the file `"myfile.txt"`:
```python
line = file.readline()
```
You can continue to call the `readline()` method until it returns `None`, which indicates that the end of the file has been reached.
### Handling Errors When Reading a File
There are a few errors that can occur when reading a file. For example, if the file does not exist, the `open()` function will raise a `FileNotFoundError` exception.
You can catch exceptions using the `try` and `except` statements. For example, the following code tries to open the file `"myfile.txt"` and prints an error message if the file does not exist:
```python
try:
file = open("myfile.txt", "r")
except FileNotFoundError:
print("The file does not exist.")
```
### Closing a File
When you are finished reading a file, you should close it using the `close()` method. The `close()` method releases the resources associated with the file.
For example, the following code closes the file `"myfile.txt"`:
```python
file.close()
```
### Summary
In this tutorial, you learned how to read a file line by line in Python. You learned how to open a file, read a file line by line, handle errors when reading a file, and close a file.
## Hashtags
* #Python
* #File
* #Read
* #LINE
* #Programming
Trong hướng dẫn này, bạn sẽ tìm hiểu cách đọc một dòng từng dòng trong Python.Chúng tôi sẽ đề cập đến các chủ đề sau:
* Mở một tệp trong Python
* Đọc một dòng tệp từng dòng
* Xử lý lỗi khi đọc tệp
* Đóng một tệp
### Mở một tệp trong Python
Để mở một tệp trong Python, bạn có thể sử dụng hàm `open ()`.Hàm `open ()` có hai đối số: tên tệp và chế độ.Chế độ có thể là "R" để đọc, "W" để viết hoặc "A" để nối thêm.
Ví dụ: mã sau mở tệp `" myfile.txt "` ở chế độ đọc:
`` `Python
file = open ("myfile.txt", "r")
`` `
### Đọc một dòng tệp từng dòng
Khi bạn đã mở một tệp, bạn có thể đọc nó từng dòng bằng phương thức `readline ()`.Phương thức `readline ()` trả về một dòng từ tệp.
Ví dụ: mã sau đọc dòng đầu tiên từ tệp `" myfile.txt "`:
`` `Python
line = file.Readline ()
`` `
Bạn có thể tiếp tục gọi phương thức `readline ()` cho đến khi nó trả về `none`, điều này chỉ ra rằng kết thúc của tệp đã đạt được.
### Lỗi xử lý khi đọc tệp
Có một vài lỗi có thể xảy ra khi đọc một tệp.Ví dụ: nếu tệp không tồn tại, hàm `open ()` sẽ tăng ngoại lệ `filenotfounderror`.
Bạn có thể nắm bắt các ngoại lệ bằng cách sử dụng các câu lệnh `thử` và` ngoại trừ.Ví dụ: mã sau cố gắng mở tệp `" myfile.txt "` và in thông báo lỗi nếu tệp không tồn tại:
`` `Python
thử:
file = open ("myfile.txt", "r")
Ngoại trừ FilenotFounderror:
in ("Tệp không tồn tại.")
`` `
### đóng một tệp
Khi bạn đọc xong một tệp, bạn nên đóng nó bằng phương thức `Close ()`.Phương thức `đóng ()` phát hành các tài nguyên được liên kết với tệp.
Ví dụ: mã sau đóng tệp `" myfile.txt "`:
`` `Python
file.close ()
`` `
### Bản tóm tắt
Trong hướng dẫn này, bạn đã học cách đọc một dòng tệp từng dòng trong Python.Bạn đã học cách mở một tệp, đọc từng dòng tệp, xử lý các lỗi khi đọc tệp và đóng một tệp.
## hashtags
* #Python
* #Tài liệu
* #đọc
* #Đường kẻ
* #Programming
=======================================
## How to Read a File Line by Line in Python
In this tutorial, you will learn how to read a file line by line in Python. We will cover the following topics:
* Opening a file in Python
* Reading a file line by line
* Handling errors when reading a file
* Closing a file
### Opening a File in Python
To open a file in Python, you can use the `open()` function. The `open()` function takes two arguments: the filename and the mode. The mode can be either "r" for read, "w" for write, or "a" for append.
For example, the following code opens the file `"myfile.txt"` in read mode:
```python
file = open("myfile.txt", "r")
```
### Reading a File Line by Line
Once you have opened a file, you can read it line by line using the `readline()` method. The `readline()` method returns a single line from the file.
For example, the following code reads the first line from the file `"myfile.txt"`:
```python
line = file.readline()
```
You can continue to call the `readline()` method until it returns `None`, which indicates that the end of the file has been reached.
### Handling Errors When Reading a File
There are a few errors that can occur when reading a file. For example, if the file does not exist, the `open()` function will raise a `FileNotFoundError` exception.
You can catch exceptions using the `try` and `except` statements. For example, the following code tries to open the file `"myfile.txt"` and prints an error message if the file does not exist:
```python
try:
file = open("myfile.txt", "r")
except FileNotFoundError:
print("The file does not exist.")
```
### Closing a File
When you are finished reading a file, you should close it using the `close()` method. The `close()` method releases the resources associated with the file.
For example, the following code closes the file `"myfile.txt"`:
```python
file.close()
```
### Summary
In this tutorial, you learned how to read a file line by line in Python. You learned how to open a file, read a file line by line, handle errors when reading a file, and close a file.
## Hashtags
* #Python
* #File
* #Read
* #LINE
* #Programming