ProxySc4444
New member
### Dự án C# SSH kết nối với Bitvisesshclient
**Giới thiệu**
Trong hướng dẫn này, chúng tôi sẽ tìm hiểu cách tạo ứng dụng máy khách C# SSH bằng thư viện Bitvisesshclient.Chúng tôi sẽ đề cập đến các chủ đề sau:
* Cài đặt thư viện Bitvisesshclient
* Tạo một dự án C# mới
* Kết nối với máy chủ SSH từ xa
* Gửi và nhận lệnh
* Ngắt kết nối khỏi máy chủ từ xa
** Điều kiện tiên quyết **
Để làm theo hướng dẫn này, bạn sẽ cần những điều sau đây:
* Một máy tính Windows với Visual Studio được cài đặt
* Thư viện Bitvisesshclient
** Cài đặt thư viện Bitvisesshclient **
Thư viện Bitvisesshclient có thể được tải xuống từ [trang web Bitvise] (https://www.bitvise.com/ssh-client-library/).Khi bạn đã tải xuống thư viện, hãy trích xuất nội dung vào một thư mục trên máy tính của bạn.
** Tạo một dự án C# mới **
Khi bạn đã cài đặt thư viện Bitvisesshclient, bạn có thể tạo một dự án C# mới.Để làm điều này, hãy mở Visual Studio và chọn tệp **> mới> Dự án **.Trong hộp thoại ** mới **, chọn ** Visual C#> Windows> Ứng dụng bảng điều khiển ** và nhấp vào ** OK **.
** Kết nối với máy chủ SSH từ xa **
Để kết nối với máy chủ SSH từ xa, bạn sẽ cần tạo một thể hiện mới của lớp `bvsshclient`.Lớp `bvsshclient` cung cấp một số phương thức để kết nối với máy chủ SSH từ xa, chẳng hạn như` Connect () `,` Connectasync () `và` ConnectWithCredentials () `.
Trong ví dụ này, chúng tôi sẽ sử dụng phương thức `ConnectWithCredentials ()` để kết nối với máy chủ SSH từ xa.Phương thức `ConnectWithCredentials ()` thực hiện các tham số sau:
*** Máy chủ: ** Tên máy chủ hoặc địa chỉ IP của máy chủ SSH từ xa.
*** Cổng: ** Số cổng của máy chủ SSH từ xa.
*** Tên người dùng: ** Tên người dùng cho máy chủ SSH từ xa.
*** Mật khẩu: ** Mật khẩu cho máy chủ SSH từ xa.
Để kết nối với máy chủ SSH từ xa, bạn có thể sử dụng mã sau:
`` `C#
BVSSHClient Client = new BVSShClient ();
client.ConnectWithCredentials ("192.168.1.1", 22, "tên người dùng", "mật khẩu");
`` `
** Gửi và nhận lệnh **
Khi bạn đã kết nối với máy chủ SSH từ xa, bạn có thể gửi và nhận các lệnh bằng lớp `bvsshclient`.Lớp `bvsshclient` cung cấp một số phương thức để gửi và nhận các lệnh, chẳng hạn như` runCommand () `,` RuncommandasyNc () `và` nhận () `.
Trong ví dụ này, chúng tôi sẽ sử dụng phương thức `runcommand ()` để gửi lệnh đến máy chủ SSH từ xa.Phương thức `RunCommand ()` thực hiện các tham số sau:
*** Lệnh: ** Lệnh sẽ được gửi đến máy chủ SSH từ xa.
*** Thời gian chờ: ** Thời gian chờ tính bằng mili giây để lệnh được thực thi.
Để gửi lệnh đến máy chủ SSH từ xa, bạn có thể sử dụng mã sau:
`` `C#
Chuỗi đầu ra = client.Runcommand ("ls -l");
`` `
Phương thức `RunCommand ()` sẽ trả về đầu ra của lệnh dưới dạng chuỗi.
** Ngắt kết nối khỏi máy chủ từ xa **
Để ngắt kết nối với máy chủ SSH từ xa, bạn có thể sử dụng phương thức `ngắt kết nối ()`.Phương thức `ngắt kết nối ()` không có tham số.
Để ngắt kết nối với máy chủ SSH từ xa, bạn có thể sử dụng mã sau:
`` `C#
client.disconnect ();
`` `
** Mã hoàn chỉnh **
Mã hoàn chỉnh cho ứng dụng máy khách SSH được hiển thị bên dưới:
`` `C#
sử dụng hệ thống;
sử dụng System.threading.tasks;
sử dụng bitvise.sshclient;
Không gian tên sshclient
{
Chương trình lớp học
{
static void main (String [] args)
{
// Tạo một phiên bản khách hàng SSH mới.
BVSSHClient Client = new BVSShClient ();
// Kết nối với máy chủ SSH từ xa.
client.connectwithcredentials ("192.168
=======================================
### Project C# SSH connection with BitvisesshClient
**Introduction**
In this tutorial, we will learn how to create a C# SSH client application using the BitvisesshClient library. We will cover the following topics:
* Installing the BitvisesshClient library
* Creating a new C# project
* Connecting to a remote SSH server
* Sending and receiving commands
* Disconnecting from the remote server
**Prerequisites**
To follow this tutorial, you will need the following:
* A Windows computer with Visual Studio installed
* The BitvisesshClient library
**Installing the BitvisesshClient library**
The BitvisesshClient library can be downloaded from the [Bitvise website](https://www.bitvise.com/ssh-client-library/). Once you have downloaded the library, extract the contents to a folder on your computer.
**Creating a new C# project**
Once you have installed the BitvisesshClient library, you can create a new C# project. To do this, open Visual Studio and select **File > New > Project**. In the **New Project** dialog box, select **Visual C# > Windows > Console Application** and click **OK**.
**Connecting to a remote SSH server**
To connect to a remote SSH server, you will need to create a new instance of the `BvSshClient` class. The `BvSshClient` class provides a number of methods for connecting to a remote SSH server, such as `Connect()`, `ConnectAsync()`, and `ConnectWithCredentials()`.
In this example, we will use the `ConnectWithCredentials()` method to connect to a remote SSH server. The `ConnectWithCredentials()` method takes the following parameters:
* **Host:** The hostname or IP address of the remote SSH server.
* **Port:** The port number of the remote SSH server.
* **Username:** The username for the remote SSH server.
* **Password:** The password for the remote SSH server.
To connect to a remote SSH server, you can use the following code:
```c#
BvSshClient client = new BvSshClient();
client.ConnectWithCredentials("192.168.1.1", 22, "username", "password");
```
**Sending and receiving commands**
Once you have connected to a remote SSH server, you can send and receive commands using the `BvSshClient` class. The `BvSshClient` class provides a number of methods for sending and receiving commands, such as `RunCommand()`, `RunCommandAsync()`, and `Receive()`.
In this example, we will use the `RunCommand()` method to send a command to the remote SSH server. The `RunCommand()` method takes the following parameters:
* **Command:** The command to be sent to the remote SSH server.
* **Timeout:** The timeout in milliseconds for the command to be executed.
To send a command to the remote SSH server, you can use the following code:
```c#
string output = client.RunCommand("ls -l");
```
The `RunCommand()` method will return the output of the command as a string.
**Disconnecting from the remote server**
To disconnect from a remote SSH server, you can use the `Disconnect()` method. The `Disconnect()` method takes no parameters.
To disconnect from a remote SSH server, you can use the following code:
```c#
client.Disconnect();
```
**Complete code**
The complete code for the SSH client application is shown below:
```c#
using System;
using System.Threading.Tasks;
using Bitvise.SshClient;
namespace SSHClient
{
class Program
{
static void Main(string[] args)
{
// Create a new SSH client instance.
BvSshClient client = new BvSshClient();
// Connect to the remote SSH server.
client.ConnectWithCredentials("192.168
**Giới thiệu**
Trong hướng dẫn này, chúng tôi sẽ tìm hiểu cách tạo ứng dụng máy khách C# SSH bằng thư viện Bitvisesshclient.Chúng tôi sẽ đề cập đến các chủ đề sau:
* Cài đặt thư viện Bitvisesshclient
* Tạo một dự án C# mới
* Kết nối với máy chủ SSH từ xa
* Gửi và nhận lệnh
* Ngắt kết nối khỏi máy chủ từ xa
** Điều kiện tiên quyết **
Để làm theo hướng dẫn này, bạn sẽ cần những điều sau đây:
* Một máy tính Windows với Visual Studio được cài đặt
* Thư viện Bitvisesshclient
** Cài đặt thư viện Bitvisesshclient **
Thư viện Bitvisesshclient có thể được tải xuống từ [trang web Bitvise] (https://www.bitvise.com/ssh-client-library/).Khi bạn đã tải xuống thư viện, hãy trích xuất nội dung vào một thư mục trên máy tính của bạn.
** Tạo một dự án C# mới **
Khi bạn đã cài đặt thư viện Bitvisesshclient, bạn có thể tạo một dự án C# mới.Để làm điều này, hãy mở Visual Studio và chọn tệp **> mới> Dự án **.Trong hộp thoại ** mới **, chọn ** Visual C#> Windows> Ứng dụng bảng điều khiển ** và nhấp vào ** OK **.
** Kết nối với máy chủ SSH từ xa **
Để kết nối với máy chủ SSH từ xa, bạn sẽ cần tạo một thể hiện mới của lớp `bvsshclient`.Lớp `bvsshclient` cung cấp một số phương thức để kết nối với máy chủ SSH từ xa, chẳng hạn như` Connect () `,` Connectasync () `và` ConnectWithCredentials () `.
Trong ví dụ này, chúng tôi sẽ sử dụng phương thức `ConnectWithCredentials ()` để kết nối với máy chủ SSH từ xa.Phương thức `ConnectWithCredentials ()` thực hiện các tham số sau:
*** Máy chủ: ** Tên máy chủ hoặc địa chỉ IP của máy chủ SSH từ xa.
*** Cổng: ** Số cổng của máy chủ SSH từ xa.
*** Tên người dùng: ** Tên người dùng cho máy chủ SSH từ xa.
*** Mật khẩu: ** Mật khẩu cho máy chủ SSH từ xa.
Để kết nối với máy chủ SSH từ xa, bạn có thể sử dụng mã sau:
`` `C#
BVSSHClient Client = new BVSShClient ();
client.ConnectWithCredentials ("192.168.1.1", 22, "tên người dùng", "mật khẩu");
`` `
** Gửi và nhận lệnh **
Khi bạn đã kết nối với máy chủ SSH từ xa, bạn có thể gửi và nhận các lệnh bằng lớp `bvsshclient`.Lớp `bvsshclient` cung cấp một số phương thức để gửi và nhận các lệnh, chẳng hạn như` runCommand () `,` RuncommandasyNc () `và` nhận () `.
Trong ví dụ này, chúng tôi sẽ sử dụng phương thức `runcommand ()` để gửi lệnh đến máy chủ SSH từ xa.Phương thức `RunCommand ()` thực hiện các tham số sau:
*** Lệnh: ** Lệnh sẽ được gửi đến máy chủ SSH từ xa.
*** Thời gian chờ: ** Thời gian chờ tính bằng mili giây để lệnh được thực thi.
Để gửi lệnh đến máy chủ SSH từ xa, bạn có thể sử dụng mã sau:
`` `C#
Chuỗi đầu ra = client.Runcommand ("ls -l");
`` `
Phương thức `RunCommand ()` sẽ trả về đầu ra của lệnh dưới dạng chuỗi.
** Ngắt kết nối khỏi máy chủ từ xa **
Để ngắt kết nối với máy chủ SSH từ xa, bạn có thể sử dụng phương thức `ngắt kết nối ()`.Phương thức `ngắt kết nối ()` không có tham số.
Để ngắt kết nối với máy chủ SSH từ xa, bạn có thể sử dụng mã sau:
`` `C#
client.disconnect ();
`` `
** Mã hoàn chỉnh **
Mã hoàn chỉnh cho ứng dụng máy khách SSH được hiển thị bên dưới:
`` `C#
sử dụng hệ thống;
sử dụng System.threading.tasks;
sử dụng bitvise.sshclient;
Không gian tên sshclient
{
Chương trình lớp học
{
static void main (String [] args)
{
// Tạo một phiên bản khách hàng SSH mới.
BVSSHClient Client = new BVSShClient ();
// Kết nối với máy chủ SSH từ xa.
client.connectwithcredentials ("192.168
=======================================
### Project C# SSH connection with BitvisesshClient
**Introduction**
In this tutorial, we will learn how to create a C# SSH client application using the BitvisesshClient library. We will cover the following topics:
* Installing the BitvisesshClient library
* Creating a new C# project
* Connecting to a remote SSH server
* Sending and receiving commands
* Disconnecting from the remote server
**Prerequisites**
To follow this tutorial, you will need the following:
* A Windows computer with Visual Studio installed
* The BitvisesshClient library
**Installing the BitvisesshClient library**
The BitvisesshClient library can be downloaded from the [Bitvise website](https://www.bitvise.com/ssh-client-library/). Once you have downloaded the library, extract the contents to a folder on your computer.
**Creating a new C# project**
Once you have installed the BitvisesshClient library, you can create a new C# project. To do this, open Visual Studio and select **File > New > Project**. In the **New Project** dialog box, select **Visual C# > Windows > Console Application** and click **OK**.
**Connecting to a remote SSH server**
To connect to a remote SSH server, you will need to create a new instance of the `BvSshClient` class. The `BvSshClient` class provides a number of methods for connecting to a remote SSH server, such as `Connect()`, `ConnectAsync()`, and `ConnectWithCredentials()`.
In this example, we will use the `ConnectWithCredentials()` method to connect to a remote SSH server. The `ConnectWithCredentials()` method takes the following parameters:
* **Host:** The hostname or IP address of the remote SSH server.
* **Port:** The port number of the remote SSH server.
* **Username:** The username for the remote SSH server.
* **Password:** The password for the remote SSH server.
To connect to a remote SSH server, you can use the following code:
```c#
BvSshClient client = new BvSshClient();
client.ConnectWithCredentials("192.168.1.1", 22, "username", "password");
```
**Sending and receiving commands**
Once you have connected to a remote SSH server, you can send and receive commands using the `BvSshClient` class. The `BvSshClient` class provides a number of methods for sending and receiving commands, such as `RunCommand()`, `RunCommandAsync()`, and `Receive()`.
In this example, we will use the `RunCommand()` method to send a command to the remote SSH server. The `RunCommand()` method takes the following parameters:
* **Command:** The command to be sent to the remote SSH server.
* **Timeout:** The timeout in milliseconds for the command to be executed.
To send a command to the remote SSH server, you can use the following code:
```c#
string output = client.RunCommand("ls -l");
```
The `RunCommand()` method will return the output of the command as a string.
**Disconnecting from the remote server**
To disconnect from a remote SSH server, you can use the `Disconnect()` method. The `Disconnect()` method takes no parameters.
To disconnect from a remote SSH server, you can use the following code:
```c#
client.Disconnect();
```
**Complete code**
The complete code for the SSH client application is shown below:
```c#
using System;
using System.Threading.Tasks;
using Bitvise.SshClient;
namespace SSHClient
{
class Program
{
static void Main(string[] args)
{
// Create a new SSH client instance.
BvSshClient client = new BvSshClient();
// Connect to the remote SSH server.
client.ConnectWithCredentials("192.168